...mower is it?How many blades?Another thing to look for is worn or torn holes that the springs attach to. i have the cable to engage blade, got connected to handle but know where it connects at the ...
...Inside the cable there is a smaller wire cable that actually,engages the mower blades.I had one to kinked,once and it caused the engagement handle hard to move. Hope this helps.Sincerely,Brad ...
Mower cuts off when blade is engaged. I replaced the cable that engages the blades now when I push the engage lever the mower cuts off. Not choking down or stressing the belt, just cuts off like when ...
...blade engagement lever move? The lever for engaging mower blades stuck. Cannot engage blades The cable is rusted,not allowing it to move,or there is something jamming the mechanical parts on the
Question about Craftsman Garden
mower turned off and the deck at its lowest setting, check the top of the deck for any debris like rocks or sticks. Then watch the top of the deck while you move the engage lever. If nothing is moving
...blade won't engage When engaging the cutting blades there is No reduction in engine noise, the blades just don't engage. The cable seems to be operating the clutch. with unit off look under at deck ...
...mower stops . Speed when in gear is not as fast as it was. Problem happened suddenly - Murray 14.5 HP lawn tractor - 10 years old. Check throttle cable at carb and make sure you have full travel. ...
Question about John Deere Garden
...mower belt on my john deere LA115. When I go to engage the blades, the deck belt will not tighten to rotate the blades. I hahe tighened the cable to engage and have the same problem. Need slap out ...
1,292 questions posted
Usually answered in minutes!
1,998 Questions
710 Questions
725 Questions
285 Questions
244 Questions
