Craftsman 20 hp 42 in. Deck Lawn Tractor - CA Model "riding mower blades hit" Questions

How do I stop my blades from hitting each other on a John Deere D 110 If your blades are hitting each other then you have the wrong sized blades. Each blade should be 21 3/8" long. This is the JD part

...blades wont engage and shut the entire mower down when i tried to engage it. the blade is not bent. the belt is not loose. i can turn the deck spindle and blade on the one that got hit, but not the ...

...mower blades breaking 46'' cut , have not been hitting rocks, stumps or other objects. Possibly the wrong blades, (to long and hitting each other), or installed wrong or generic blades that are ...

mower not running and see why the blades aren't turning.  Most likely something is bent (maybe blade) and hitting something.  The smoke is probably from the belt slipping and getting hot

...blades. There is no noticeable loss of cutting when I use the mower. Is there a possibility that a shaft or blade is bent? I don't know anything about mechanical issues so I may not be using the ...

...riding along mowing and the blades just quit turning, belt is not off? If you hit a bump too hard, I believe it's equipped with a shock sensor that shuts down the blades or if you slightly lift off ...

...RIDING MOWER AND I AM TRYING TO CHANGE THE MOWER BLADES, THE BLADES WILL NOT LOCK SO I CAN TURN THE NUT THAT IS HOLDING THEM ON. SO HOW DO I LOCK THE BLADES SO THEY WILL NOT TURN? you need to remove ...

...mower blades New baldes on John Deere Sabre make clunking noises -blades are tight to spindle and do not seem to be hitting the deck?? Hi make sure the blades are not hitting each other, also check ...

...blades blades are hitting each other on a cub cadet 33" wide area mower and I can't get the blades off check the belt that goes from each blade there is a timing mark on

...riding mower. I have a Bolens 22.5 hp riding mower...I lower the carriage to mow...and even on the highest setting it practically scalps my lawn. I've hit dirt even with the blades. I don't see a ...