...adjustment, turn the steering wheel back and forth, tighten the adjustment screw again, tighten the lock nut and go for a spin. Hopefully adjustment improved it a bit. If not, try it again. Do not ...
...steering shaft, tighten up the screw on the side with the nut there and also the big plug on the bottom needs some adjustment, don't over tighten, then it will bind, if there is still play then ...
...adjustment or replaced. Check all your front end steering components and linkage for loose play. If it has a straight axle the camber/caster may possibly be adjusted which if off can also create this ...
how to take play out of rack & pinion steering New pinion gear! - some are adjustable - to push the gears closer together - but I doubt it on a lawn mower = new rack - Sorry
steering pivot bushings. You jack up the front from the center and check for play of the pivot bushings by teetering the tie at the 6 and 12 oclock positions. If you get a lot of movement the bushings
how to get my zero turn husqvarna to steer straight it will pull to the left when going forward. the rear left tire has less power than the right could be check valve going bad will have to take shop ...
2,432 questions posted
Usually answered in minutes!
1,006 Questions
710 Questions
725 Questions
285 Questions
244 Questions