Craftsman 17.5 hp 42 in. Deck Lawn Tractor - CA Model "spring connect riding mower" Questions

riding lawn mower 3800 and we don't know where to replace them at, they engage the gears. First make sure you can still engage the blades.Many mowers use a cable attached to a spring to engage the

...Riding mower was running fine last time used, except that brakes stopped working after a while. yesterday while raking leaves found spring with nut attached. Looked in my sears owner;s manual and ...

...behind the deck on the mower frame it will have a notch that the spring will connect to. You should be able to see where the paint may be missing or scratched from where the spring was ...

...riding mower Check to make sure brake rod spring is connected,also pads could be bad if older mower,there are two nuts that lock into one another turn in oppisite directions to seperate then adjust ...

...spring to sort of match it up or are you possibly putting it in the wrong retaining hole. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by ...

Where do the springs connect on a bolens 38 inch mtd fiding mower deck On the spring hooks

...spring connect to on a Craftsman YS4500? It should connect on top of the idler pulley on the idler arm. The bolt is extended and the spring hooks over it with a 'hairpin' or cotter key through the ...

...Connect the anti-sway bar to the chassis bracket and secure with the retainer spring. 7. Push the clutch cable housing guide into the bracket, and slide the collar onto the guide and secure it with ...

...connect to? On the deck of my Craftsman Lt 2000 riding mower. main one u need is the one on the engage pulley, it connects to pull plate and the center of the mower deck in the hole in deck. the one ...

WILL TURN OVER BUT STARTER WON'T CONNECT STARTER WON'T CONNECT If the turns over fast, your benix spring is broke.  Needto replace starter or rebuilt starter.