Craftsman 17.5 hp 42 in. Deck Lawn Tractor - CA Model "riding mower engine runs wide" Questions

...riding lawn mower. Has a have a craftsman 18.0hp riding lawn mower. Has a kohler md# cv492 engine. engine runs wide open. What spring have I lost off of the control linkage Most likely it is the ...

mower, the engine starts running really rough. it has electric pto. any ideas? Are you sure you engine RPM's are high enough? If so adjust you carbs.high speed screw with the throttle in the wide open

...riding mower. your govenor linkage is on wrong remove the link and install it the proper way...good l uck Drive it in a ditch, let the lawn grow. Don't change your underwear and shirts and always ...

...riding mower, runs pretty good wide open and mowing, but when you cut the blades off and idle down, it chokes off and has to cool down to start again. Try spraying carb cleaner into the air intake. I ...

...runs wide open and the throtle doesnt make any difference. Cables are still hooked up and moves the arm back and forth but doesnt change the engin speed. Any ideas? those are not connected with ...

...riding mower. The engine is losing power when the blades are engaged (electric clutch). I've checked compression in both cylinders (150 and 170); the spark plug as wet with gas on the cylinder that ...

...mower with a 747 cc Kohler engine, the motor has 9 hours on it but the engine surges at anything but wide open you need to adjust carb on the side of carb there is a mixture adjustment screw on slow ...

...biside the mower that connects to your carb. move it by hand while running if no change the governor has broke,, need to take engine off and replace, but if you move it and it slow down change ...

...Kawasaki engine to run wide open after sitting for months and continued this after 3-4 starts and shutdowns. see if the linkage is binding if not you will need to open the engine and check the ...

...engine runs wide open even with throttle off 20 HP Check the cable connection down near the engine, it should be attached to the throttle lever, it is not uncommon for the screws that clamp the cable ...