Craftsman 17.5 hp 42 in. Deck Lawn Tractor - CA Model "mower starts dies cutting" Questions

...mower dies. I have changed the oil, and gas filter. I am able to cut with the mower for about 3 minutes from an overnight cold start. Please help??? Check everything is clean. Check the air filter is ...

John Deere 65 mower cuts for about 20 min. then dies, will start right up again, cuts maybe 5 min., dies again You have a partly clogged fuel line or the vent in the gas cap is clogged. Sam

...mower dies when I let off the clutch Sep 19, 2008 pto on Cub Cadet will not stay engaged... Apr 6, 2008 Craftsman Mower deck (clutch) Won't engage Jul 1, 2006 More results from ...

...mower that will run for about 10 minutes while cutting and then just die but will start again in about 5 minutes or so. any idea why? Sounds like the fuel shutoff solenoid on the bottom of the ...

...STARTS GOOD BUT WHEN CLUTCH RELEASED ENGINE DIES; WHEN MOWER LEVER PARTIALLY ENGAGED ENGINE DIES. DOESN'T SEEM TO BE THE SEAT SWITCH. cut the wires running to the switch...try again...if same, stripp ...

...starts and runs, then cuts out and dies. If it sits awhile with the battery charging, it runs again for several minutes, then cuts out and dies. Is this an electrical problem? What would cause that? ...

...mower starts backfiring and ends up quitting. mower will start back up but die out again as descibed. I had the same issue and after trying everything I tokk the gas cap off and noticed there was ...

...starts and runs but why does it die while cutting? acts like the grass is to thick I heard I need to adjust something with a dollar bill but don't know that that means, Poulan PR625Y22SHP Lawn Mower ...

motor dies when i lower the blades was mowing it was just fine it died and it started right up but when i lowered the it stsrted smelling like burning rubber !!!! first you need to check under deck to

...mower motor dies occasionally, then will start back up again in a few minutes. The manual does not mention this at all. no thermal cut-off. check for the switch terminal & the terminal where u plug ...