Craftsman 17.5 hp 42 in. Deck Lawn Tractor - CA Model "mower broke key" Questions

broke, the deck hit the ground and the blades stoped but the mower kept running, she backed the mower to the shed about 50 yard away and turned it off, now it wont start, it doesnt even have power, it

why wont my rear pulleys turn on my mtd riding mower somthing broke enside trans remove and lookinside for brokin key way

...mower stopped moving; engine and blade still running. Check the drive belt that runs back to the transaxle,it sounds like it broke.If the belt is in the pulley check to see if the transaxle pulley is ...

...ignition switch x475 john Deere Key broke off in my x475 John Deere. How do I remove the ignition switch? To remove broken key use an o ring pick and a doctors stitch twizzers . works every

...mower I put a new solenoid and a new switch but can't get any fire to the spark plug Take top off.Look to see if magneto has rust on the coil.if so,get a steel brush,and clean mag,coil.That ...

mower it moves freely as if it were in neutral, whereas before it wouldn't. Could I have broke the axle by using the sledge hammer? Sheared an axle key? Moved the release lever? (If so I cant find

John Deere STX38 Put in gear and doesnt work did you just remove a wheel/tire combo for repair... check for axle key is the motion belt broke/damaged

broke somewhere. This is my first rider, I don't know about repairing them, never had the opportunity. I took out the spark plug and it looks kind of bad, but I don't know if a bad plug will just stop

...mower 14.5hp briggs n straton. the problem is that when I go to start itit backfires and then I find that the flywheel key had broke. It happened 4 times so far. I had checked the timing on the crank ...

mower won't move she stopped in the middle of my yard. motor runs fine but won't go forward or reverse. any one had this problem? Sounds like the belt going to the hydrostate broke. Or a key on one of