Bamix Gastro 200 Handheld Blender "water stopped working" Questions

...It is a simple 10 speed that works perfectly. Something sticky is in the threads... Try very hot water in the sink as a start, while boiling some water on your stove. With the glass and plastic ...

...stopped working. The motor sounded awful and then I had to stir the mixture and unplug the blender and restart it. Any suggestions as to what might be wrong? Thanks WELL, WHEN YOU UNPLUUGED THE ...

...the blades be incorrectly angled? what would possibly cuase this Hi, cauliflour is not compact no water mix, I have suggestion , cut it 1/2" long make it fine put in blender mix w/small amount of ...

...stopped turning... the motor is working, but it doesn't seem to be spinning the blades... what could be wrong? any help would be greatly appreciated Check the blade with it off the base and make sure ...

...stopped working. I decided to use it the other day and it would not turn on. I checked the plug, the circuit breaker and there was no obvious problem with the mixer itself. I can not take it apart ...

...stopped working. The blender (motor) doesn't operate when I fix the lid/container. I don't believe, I misused it by over heating or putting in water. I think, the motor is the problem. I will ...

stopped working, there is slight burned smell, I was blending walnut pieces with dates paste. Any suggestions? If the burning smells like plastic then the walnut shells most likely put too much strain

...blender I use the blender for mixing milk for the babies. The milk is in powder form and I just add water and stir. When I press stir all the lights go on and I get something like a power surge and ...

...water, spin the blade a bit and sit on a paper towel.. 20 minutes later, there was a puddle the size of a quarter. I see the retainer nut on the bottom, but it seems to be "fused" to the bottom of ...

...the length of time set? timer set 95min. **** roast, and veggies . under 3.5 pounds. 1 1/2 cups water. defaults to "warm" after 15 min. please advise You probably need to push set again or ...