Question about Ace Hardware Tools & Hardware - Others
put the spring mechanism back into the stapler. If you do not know the correct size for your stapler someone at your local hardware store can help you find the correct size and they will probably even
put the staples depress the handle enough to release the side catch on the stapler. now pull the bottom track down. insert a few rows of staples and snap the track back up into the stapler. the spring
...put the screws back in. If the handle coil spring and the flat spring are not seated properly the top cover will not go on easily. These types of staplers are designed to clear from jamming without ...
Question about Staples Tools & Hardware - Others
...put tension on the spring, rhen the spring may be worn and need replacing. I have a 77701/15 model swingline with the same problem. It was the as kosmikkurt had described: the pusher was not sliding ...
...At the end of the stapler opposite where the staplers are driven out is a release. Push it in and turn it and it should come out with a long spring Load your staples, put the spring back and lock
spring-loaded and is held in place by a little hook. Push in on this metal square as you move it up (or is it down?) to disengage the hook. Now the piston will pull out easily. Put your staples in the
Question about Arrow Tools & Hardware - Others
...staple gun, now you want to put the spring load back in it to lock it to use it? slide it in, and push downward to lock it in. question how do you replace the spring back into the upholstery
...the back and push them into the stapler. I own a Power Sot and the directions are very clear. Squeeze the clip at the back of the unit and pull the spring-loaded clip out. Put your staples in and
...put too many staples in at once or the tension spring on the slide is catching. Try one bar of staples at a time. On the slide there should be a clip on the spring turn it to line up with the end ...
...spring where the staples load fell out and I can't figure out how to put it back Call the manufacturer with your email address and ask for detailed instructions on how to replace the pusher ...
14 questions posted
Usually answered in minutes!
65 Questions
25 Questions
28 Questions
15 Questions