McCulloch 16 In 4.5 Hp Electric Chainsaw With Carrying Case MCC4516FK "hard pull" Questions

Ad

Question about Garden

1 Answer

...hard to pull saw extremely hard to pull, high compression, not flooding and exhaust port and screen clear. piston/crank move freely . check starter pulley .it may be warped and hard to pull under ...

Ad

...hard to pull on rope - almost stops my arm. Acts like the ignition timeing is too advanced and wanting to run backwards. Points are good and gap about 20 thousanths inch. The key in flywheel is good ...

Ad

Question about Husqvarna Garden

1 Answer

Hard to pull starter rope When cold,rancher 55 starter rope hard to pull I am suspecting you may have some issues inside the cylinder. If it gets easier when warm / hot. You may have a stuck ring or a

...hard, but it pulls easy when spark plug is removed. What can be causing this problem???????? Has it always done this or has it developed? Some saws have a decompression button to make it easier to ...

...hard to pull? If it worked fine the last time you used it, then pull the spark plug and try pulling the rope. See if it's easier or if gas shoots out of the plug hole. I've seen this happen when the ...

...Hard to pull cord seams like very high compression, even rips back out of my hand, when plug is pulled no problem pulling cord Saw is about ten years old, the only other thing I can think of is the ...

...hard to pull the starter rope. If you get it started it runs and cuts great.Why is the starter so hard to pull? Thanks for your expertise answer. Ray Decker [email protected] There is a ...

HARD TO PULL CORD WITH SPARKPLUG IN CHAINSAW. IF HARD TO PULL CORD WITH SPARKPLUG IN CHAINSAW. IF I REMOVE THE PLUG IT PULLS EASILY. sound like hydraulic lock,try leaving the spark plug out and pull ...

...hard to pull start..first time this season trying to start...seems like too much compression...pulls nice and easy with spark plug removed..with the spk plug in...very hard to pull..still has some ...

Question about Husqvarna Garden

1 Answer

hard to pull runs well after started The flywheels are keyed on the Husqvarna chainsaws, there is not way to change the timing. I would suspect you may have some carbon build up causing the hard start

Not finding what you are looking for?
McCulloch 16 In 4.5 Hp Electric Chainsaw With Carrying Case MCC4516FK Logo

215 questions posted

Ask a Question

Usually answered in minutes!

Top McCulloch Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Floyd Rogers
Floyd Rogers

Level 1 Expert

8 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a McCulloch Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...