...clutch. They can be replaced. To replace you must keep the piston from moving. I have stuffed some rope into the spark plug hole and then remove the nut holding the clutch in place. Then use a puller ...
Question about Husqvarna Garden
replace the clutch cover removed clutch cover to replace chain and I cannot get to release so I can reinstall clutch cover Hi there Sometimes that's not an easy job . I work for a Husqvarna dealer and
...replace the clutch drum? is there a special tool needed. To replace the drum you need to first remove the clutch, there are two ways to remove the clutch, fisrt by entering a flat blade screw driver ...
...replace clutch drum sprocket drive on partner 370 chainsaw You need to remove the clutch there is a special tool that fits into the two cut a ways in the sides of the clutch centre, the tool then has ...
clutch replace clutch Remove the spark plug and stuff a rope that will NOT shed particles in the combustion chamber. This will keep the piston from full travel allowing you to remove the nut to ...
replace clutch spring What is the procedure to install a new clutch spring on an echo cs-650 evl chain saw? You need to remove the clutch assy from the chainsaw prior trying to replace the spring. Be ...
...by)then there may be a nut that will allow you to remove the clutch pack...sometimes the clutch pack will unscrew of the crankshaft..depending on model..then replace and re-assemble in reverse ...
...replace the entire clutch assembly, so if you have never replaced the drum or sprokets before once you remove the drum if the clutch spring is not broke, just replace the drum and sprocket will save ...
...clutch drum, to replace this you need to remove the side cover nuts and remove the side cover/chainbrake, make sure the brake is de activated by pulling the hand guard fully back to the top handle ...
138 questions posted
Usually answered in minutes!
295 Questions
300 Questions
96 Questions
40 Questions