Husqvarna Chain Saw 20" Bar "not turn" Questions

Ad

...not turn that same screw in to where it was and try the other screw the same way. If you're good, you can adjust the screw while the saw is running to get the best full throttle run. This is not an ...

Ad

Question about Husqvarna Garden

2 Answers

...not turn the high speed mixture screw so there is less than 3/4 of a turn from seated position, The reason is not to run the engine too lean so engine does not overheat. When turning the screw in, ...

Ad

Question about Garden

1 Answer

...help me? Even touching carb jets is the very last resort, if u absolutely have too, turn them closed, b mindful do NOT over turn. Turn jet 1/4 turn and if needed 2nd 1/4 turn. no more than 1/2

Question about Poulan Garden

1 Answer

...not idle. Turn the idle speed screw (not the idle jet screw--L) CW 1/4 to 1/2 turn so that the engine continues to run, but the chain doesn't turn. Make sure the air cleaner is not plugged. Hope this ...

Question about Husqvarna Garden

1 Answer

...not turn If the engine will not turn it may well have seized, remove the muffler and take a look at the piston through the open exhaust port, if the chain is not turning make sure the brake is off by ...

Question about Poulan Garden

1 Answer

...For the low turn it in the same way until you feel the slightest resistance and turn that one out 1 turn. The carburetor probably has to be rebuilt since the primer is not working like it

...Turn the Low muxture screw out 1 1/2 turns from fully seated position.Make sure that your fuel mix is 50:1 and that your Air Cleaner and Spark plug are clean. If your Stihl is still not running ...

...not turn the 'L' screw clockwise and see if the revs increase that way. What you are trying to find is the point when the revs reach their peak (without touching the throttle). Once you have found ...

Question about Stihl Garden

1 Answer

...not spin. I can turn it by hand, but it is not spinning when the engine is running Remove the entire cutting head from the pole and stick a screwdriver in the end and try to turn it to see what ...

Question about McCulloch Garden

1 Answer

not turn, check the ignition unit is not rubbing against the flywheel,remove the spark plug and try to turn the engine now, it may be completly flooded with fuel, if it still will not turn, there is a

Not finding what you are looking for?
Husqvarna Chain Saw 20" Bar Logo

540 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...