Husqvarna Chain Saw 20" Bar "fuel cap" Questions

...fuel cap. Sounds like a vapor lock in the tank from an unvented cap or a blocked cap. If it runs with the cap off or loose, replace the cap. DId you check the fuel filter?. If you can reach down ...

...fuel cap and started priming. Saw that fuel now is passing, closed fuel cap, it started but died. Saw the primer bulb was empty. I layed the chainsaw on it's side, primed, and it started and ...

...fuel cap isn't venting properly. The tiny sintered bronze pellet cast into the center of the fuel cap is plugged, allow a vacuum to form in the tank as the engine runs, finally starving the engine. ...

...fuel cap didn't have to deal with the ethanol added to most fuels today. My Pioneer fuel cap swelled when I put her away wet, now I grunt a little removing it. A new fuel cap may only solve this ...

...fuel cap. Where can I find a replacement primer fuel cap for my (Textron) Homelite Little Red XL chainsaw, UT 10741 I have a Homelite Super 2 chainsaw that has a hole in the primer bulb on the fuel ...

...fuel cap and replae it ,little help on why? fuel cap venting or what? yes there is a vent some have a little valve on the back of the cap some have a second fuel line with the valve on it look for it ...

...fuel cap and not have fuel run out try running it with a loose fuel cap. If this works look carefully at the cap for a plugged vent hole. If you can't loosen the cap find the vent tube and see if it ...

...Fuel cap primer bulb (The primer bulb is built into the fuel cap) for a Homelite Super 2 UT10696C1 You can order the fuel cap on the link below. ...

...replace it then it should run good,If not replace fuel cap.Take fuel cap off and start.if runs and accelerates then replace fuel cap. If not the exhaust is stopped up with carbon clean it or

...fuel cap for saw to run,fuel filter is good. Once i close cap saw dies. Get a can of "brake parts cleaner" or something like that (brake parts cleaner can damage plastic) and clean the fuel ...