how to fix the choke on homlite 38 cc 16 inch gas chain saw fix choke More than likely, your choke became disconnected. I have attached a link from YouTube of a video on this. There are many useful ...
...fix this the saw runs great and I don't want ta throw it away if there is a way to fix it Many saws have the clutch just spun onto the threads on the crank, in some operations it can spin off on ...
Question about McCulloch Garden
...fix it please help. it runs great but the chain won't engage has anyone had this problem? I am also wondering what is the 1962 1-62 Mcculloch chainsaw worth nowadays since I want to figure out if it ...
...runs but won't idle how do I fix thank you I cleaned the fuel tank changed spark plug cleaned carburettor new fuel and oil was not running at all but now running but no idle the idle screw might be ...
...broken before the switch. Depending on the make,you'll need to remove the pull start housing to fix
...belt drive, all seems to be okay. is there a way to tighten up the belt, ? or what should i do to fix this problem? Does the impeller have a clutch control so that the motor continues to run, but ...
...fix rock both the high and low needle valves 1/4 turn each way and then return them to the original setting. Start the saw and open or close the needle marked HIGH or just an H till it runs
my husband is fixing his chainsaw. It has a choke pulled out all the way to start it then runs/revs to high. when he pushes the choke in it dies. what needs to be fixed inside? check ur governor ...
saw will run fine for five minutes then quit what are air mixture screw settings 90degrees 5000 ft chainsaw runs for fve minutes and quits. how do i fix this?
...is being choked or flooded, then stalls. HI. I THINK IF YOU PUT A KIT IN THE CARB I THINK THAT WILL FIX THE PROBLEM. ...
540 questions posted
Usually answered in minutes!
529 Questions
473 Questions
353 Questions
122 Questions
131 Questions
