Husqvarna Chain Saw 20" Bar "chainsaw muffler loose" Questions

coming loose, there was a retro fit muffler with a third fixing screw available, if the muffler comes loose there is a chance that it will melt the tank underneath, so you need to address this problem

...chainsaw to spit fuel out of the air intake When i run my saw at full power it spits fuel out of the air intake and when i put the air filter on it looses power and cuts out. remove the muffler and ...

...muffler Go to stihl dealer. If you replace screws make sure they have vibra-tite or other thread lock to keep from vibrating loose. Here: Vibra TITE 213 VC 3 Threadmate Threadlocker 65 to 165 Degree ...

...chainsaw looses power when cutting, the mix the standard stihl oil mix, don't know the ratio, machine is three years old, operating at 9000' elevation remove and open the muffler and ...

exhaust muffler loose on 031 stihl chainsaw Match fastener head with socket turn clockwise until tight.

...muffler was loose so I tightened it. I have tried to adjust the low speed adj but to no avail. I have a Husky doing the same thing. The paper pumps get stiff and do not pump fuel very well.  ...

...chainsaw that got real hot the muffler screw came off causing the muffler to wiggle to a slant and melt my plastic right above the bar. What should I do that is very unusual. There was an issue with ...

muffler too loud is the muffler loose?is the screen inside burned out take it off and open it up

has began to rattle. The bolts seem to be tight but the muffler is still loose. Please help? had it for about 3 yrs. Sounds like the interior baffles have collapsed.. Looks like time for a replacement

...seem to tight but the muffler itself is loose! how is it suppose to come off the motor? thank you very much!! We need a model and serial number to provide a quality answer. You can respond below. ...