Husqvarna Chain Saw 20" Bar "broken chainsaw handle spring" Questions

...chainsaw throttle trigger the throttle trigger will not return to its idle position. is this a problem with spring in carburator or spring on the trigger? Its a missing or broken spring in the ...

chainsaw will not quit vibrating while im cutting wood? This could be a number of issues, if it has an anti vibration system is this in good shape ( with the saw stopped, hold the rear handle, now try

...so I can put the side cover back on? that spring is the clutch brake if it not broken all you have to do is set the handle in the off setting by pushing it forward, them put the side cover back

...broken pull rope and can not get the spring assembly right to recoil the rope. I assume you can get it assembled, but you aren't getting the right recoil action. Before you put the end of the rope ...

pull cord is pulled out and saw is dead more information needed. You may have just broken the recoil spring in the pull start housing

...chainsaw to see if i might fix it it was stuck fast so i took the cord off to check the spring and it came off how do i get it back on what kind of tools do i need Your spring is probably broken. You ...

...chainsaw? throttle trigger stuck can not squeeze it is all the way down and will not return to it's regular position The trigger, lockout or trigger/lockout spring has failed of may have debris stuck ...

broken, or it may have pulled loose from one of the attachment points. Remove the cord from the pull handle and unwind it from the spool if it isn't already pulled out. Remove the spool from the frame

...handle stays all the way down and does not work. I also noticed the bearings bracket is broken The bracket that has the Idler Pulley is broken? Well that's why it doesn't work. Not sure what the real ...

...handle back and forth, it doesn't adjust the speed of the motor, only runs full out, or quits. the connection to the pull trigger and the carby has fallen off replace it. either that or the return ...