Husqvarna Chain Saw 20" Bar "262" Questions

how to adjust oiler on husqvarna 266 Your saw didn't get a hit, she long of tooth? Husky 262 manual http://weborder.husqvarna.com/order_static/doc/HOUS/HOUS1998/HOUS1998_1018843-26.pdf The adlustment ...

Points setting for the 257 husqvarna chain saw No points, electronic ignition. http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/d23e6e281a4a68ca88256d09001faca0?OpenDocument Hth ...

hi. what is the correct fuel mixture for the husqvarna 262 xp? regards Ben 50:1 2.6oz. of oil to 1 gal. of fuel or 6.4oz. of oil to 2 gal. of fuel.

Ineed the proper mix for gas. for a Poulan pro 262 18in. chain saw. Hi sephil99125... 50:1 oil to gas ratio 1 pint of 2 cycle oil to 6 gallons of gasoline Please take time to rate me

magnito clearence clearence setting for 359 chain saw Hi Stanley, 8 thou is the correct gap. regards Phil.

husquvarna model 55 chainsaw throttle linkage routing Diagram of the throttle linkage, hope this helps.

husqvarna 45 coil setting Slide a 0.25 feeler guage between the flywheel and the ignition module.

husq. 45 coil setting The air gap between the coil and the flywheel magnets should be set at 0.3mm

45 coil setting The air gap between the unit and the flywheel should be 0.3mm for the Husqvarna 45

how do I adjust the air gap on the ignition coil The best way is with an air gap tool. Most Husqvarna saws run a 0.3 mm or .012" air gap.