Poulan ES350 16" Chain Saw "start 6 inch chainsaw" Questions

Ad

...start" position. Pull choke all the way out. Prime unit 6 times. Place saw firmly on floor, slide right foot under handle and have left hand firmly on top handle. Pull throttle and lock it in high. ...

Ad

Question about McCulloch Garden

1 Answer

6 mdel 600086u serial 1362353 Check the muffler and air cleaner for plugging. Make sure the carburetor is tight to the engine. Turn the H jet needle CW to stop (lightly), then back out CCW 1-1/2 turns

Ad

Question about Homelite Garden

1 Answer

...stART HOMELITE 18 INCH TIMBERLINE Make sure you have fresh fuel mix in the tank. Pump the primer bulb about 6 times or less until the bulb draws fuel into it. This fills the carburetor with fuel. ...

Question about Ryobi Garden

4 Answers

...chainsaw with the same fault. The brake is not releasing when the brake handle is pulled right back. I can only run mine if the brake handle is pulled back to the main handle with a tyrap - defeats ...

...start again, spark plug wet - should i replace carburetor? Most carburetors can be rebuilt and solve most problems, but occasionally the debris is into places where cleaning is not possible, and must ...

Question about Husqvarna Garden

2 Answers

I have an old 61 rancher, It has not been started in over 5 years. trying to crank it over,but the starter cord only will come out about 6 inches until it hits heavy resistance. If I remove the plug ...

6 turns more (during start). Wedge the spool so that it can't unwind the spring again. If the old cord was about worn out, replace it with fresh. Melt the cord end somewhat so that the knot won't pull

Poulan Pro 220 saw starts & runs fine when finger on throttle, will not stay at idle. Rplaced plug & same issues. All you need to do is try to adjust the throttle idle speed or else a cheat ...

...inch 38 cc with anti vibration handle ,so you can cut for 6 hours straight, if need be. You get a reconditioned saw that is ready to go and a 90 day warranty. or buy the saw brand new for $110.00 and ...

...worked for a couple of times with 40:1 Now it won't start Hi llamalodge20... 40 to l is too heavy with oil....try 50:1...One pint of 2 cycle oil to 6 gallons of gasoine. Please take time to rate ...

Not finding what you are looking for?
Poulan ES350 16" Chain Saw Logo

19 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...