Poulan ES350 16" Chain Saw "replacing starter cord pulley" Questions

Ad

...starter, if the cord is still under tention, pull the starter handle out approx 8", whilst held out hold the pulley to stop it retracting, let go the starter handle and unwind the now lose cord from ...

Ad

Question about Poulan Garden

1 Answer

...into the cut a way in the side of the pulley, wind up the spring, allow it to pull the cord back into the starter, only wind it enough to pull the cord fully back into the cover, re fit the

Ad

Question about Garden

2 Answers

starter cord jammed on my mcculloch cabrio 433l strimmer, only pulling a few inches First remove the spark plug and see if the starter can be pulled without the plug in place. If it cannot, any job ...

Question about Echo Garden

1 Answer

...starter spring as you can by spraying it with WD-40 or similar wiping off any excess and avoiding getting too much of it on the cord. Take great care not to let the spring jump out of its retainer - ...

...starter cord retaining screw and remove cord. Replace cord on new pulley with retaining screw. Sit the cord into the slot mention previously on the side of the pulley. Line up the slot on the spring ...

...starter cord on echo cs345 chainsaw This is a messy frustrating job, and if you had to put a price on the hassle that it is, it is probably better to pay somebody else to do it. That said, remove the ...

replacing pull cord on my mcCulloch M1255 CLS pull cord broke and i can't figure out how to replace it. The first thing you do is to reattach the pull cord to the pulley. If you are lucky both ends of

Question about Homelite Garden

1 Answer

cord will not rewind 1 Turn the Homelite chainsaw so that the bar and chain are laying flat and the starter cover is facing up. Loosen the four starter cover screws by unscrewing them counterclockwise

Question about Poulan Garden

1 Answer

...starter pulley, once you feel more tention on the pulley allow it to pull the cord back in, if you cannot get it to tention, remove the centre screw ( be carfull there is a long spring behind here ) ...

Question about Garden

1 Answer

starter cover with the cord and pulley inside. If there is a plate holding down the cord pulley, remove it and carefully lift out the pulley, try not to dislodge the recoil spring as this is where the

Not finding what you are looking for?
Poulan ES350 16" Chain Saw Logo

19 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...