...Stihl chainsaw is factory-adjusted to provide the best performance.... You'll find three adjustment screws for the carburetor, usually located under the air filter cover. Factory carb setting on ...
Question about Stihl Garden
...stihl 025. the carb i had had 1 adjustment the replacement carb has 2 set screws, what should the settings be to get started with Usually when purchasing a new Carb, they are set very close. No ...
Question about Stihl Garden
...stihl products everyday and the most common trouble we encounter with a unit that has set for awhile is carb damage from ethonal fuel sitting in the carb. Some of these carbs can be cleaned and a new ...
STIHL chainsaw bogs down when i accellarate and wants to die. Starts good on chocke and revs up when comming off choke to the next stage on the switch. i have adgusted the one carb. setting and get it
carb settings what is mixture and tickover settings What make and model are you trying to adjust? Some of the smaller Stihl saws only have a tickover adjustment.
what settings should i start off with on carb. @stihl 025 Screw the screw fully in but not tight then turn it out 3/4 of a turn
...carb zama Carburettor settings for the H and L screws and the LA screw Hello, Check this site: http://tekindoor.com/miscellaneous/stihl-chainsaw-carburetor-adjustment/ Theher is good
carb settings for stihl ts 400 does anyone know the carb. settings for the ts 400. Standard settings: screw both in fully, unscrew H screw 1 full turn anticlockwise. unscrew the L screw 3/4 of a turn ...
Stihl MS250 overheats and burns out engine. the carb fuel augments mite be set to lean or gas oil mixture not mixed rite
stihl ms660 ilde chain speed to fast Somewhere on the carb linkage you will see a set screw touching it. Turn the screw so it does not push the linkage so far.
513 questions posted
Usually answered in minutes!
583 Questions
255 Questions
170 Questions