...coil to flywheel are set at .010 to .012. The actual setting depend on the manufacture specs. With the addition newer timing circuits in these for spark advance you should set them the factory specs. ...
Husqvarna Chainsaw #41 What is the air gap for the coil? The air gap should be set to 0.3mm, the spark plug gap should be set to 0.5mm
...a blue. Can take off flywheel and replace with a good one. Or you can play with the gap on the magneto/coil, and insert a piece of paper between the coil and the flywheel magnets, to set for air
for stihl chainsaw need to know setting of coil on 14inch stihl chainsaw Use a business card. You can use it on any 2-cycle equipment and get a good gap. Or, take a microfiche card and fold it in half
what is the gap setting on the coil The gap setting is .010 or if you don't have a feeler gauge you can use a business card. GOO LUCK FRIEND.
what is the gap setting for the ignition coil i rebult the engine but i cant find out what the gap setting is. Any help will be a big help. 0.3 mm (.012 inch)
...coil on unit still no spark I have the same problem and set the gaps at .002in. Still can not get a strong spark at the plug. Remove the kill terminal and still no spark. New ignition module and new ...
...is the air gap set at to set the timing I want to set the air gap between the coil and the magneto using a feeler gage Normally you just set the air gap so it is as close as possible without
bought new spark plugs and need to know with feeler guage number to set the coil against the flywheel. The air gap for the flywheel is 0.3mm and the plug gap should be 0.5mm
...coil on a echo 16 inch chainsaw? Remove the ignition switch wire from the module. Set the module pole gap by turning the flywheel magnets under the module poles, insert a thin business card into the ...
513 questions posted
Usually answered in minutes!
583 Questions
255 Questions
170 Questions
