Poulan Pro Chain Saw 46cc 20" "rewind starter cord" Questions

Ad

starter cord. Remember how you do this because after replacing the cord, you'll have to rewind the cord and spring before inserting it back in the housing. re-attach the pull cord housing to the chain

Ad

Starter cord will not rewind. How do I get to the coil spring? Is the clutch pressed on? Removing the clutch is the only way, I see, to remove the plastic housing. A breakdown would be very helpful. ...

Ad

Question about Poulan Garden

1 Answer

...rewind the starter rewinder? If both ends of the spring are still attached, then turn the spool CCW (remove the cord first) until it is fairly wound, but still be able to turn 5 or 6 turns more to ...

...starter housing and rewind the spring large coil to small (need eye protection, both hands and no women around work area!). I'm right handed so I tension the spring enough to insert it inside the ...

Question about Garden

1 Answer

...starter mechanism and have them rewind the cord for you if you don't feel comfortable about installing the new cord. When done, just reinstall the starter on the saw and attempt a start. Good

Question about Poulan Garden

1 Answer

starter housing is removed with a #20 Torx bit, then the cord replacement becomes obvious. You'll need to prewind the spring about half it's capacity before engaging the cord reel to the rewind spring

Question about Homelite Garden

1 Answer

...starter housing and rewind the spring large coil to small (need eye protection and both hands). I am right handed so I tension the spring enough to insert it inside the previous coil while holding ...

...Remove the starter cover, rewind or wind a new cord onto the spool. Turn the spool about 2 turns against the spring, thread the pull cord through the starter cover and reinstall the pull handle. ...

Question about Poulan Garden

1 Answer

starter housing (Easiest). I invert and secure the housing and rewind the spring large coil to small (need eye protection, both hands and no women around work area!). I'm right handed so i tension the

...rewind spring and it will not hold onto the cam on the starter pulley. Since the pulley is plastic, the pulley could also be the problem. One other possibility, did you pretention it? There should be ...

Not finding what you are looking for?
Poulan Pro Chain Saw 46cc 20" Logo

513 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...