Poulan Pro Chain Saw 46cc 20" "makes gas hard" Questions

Ad

...gas shoots out of the plug hole. I've seen this happen when the diaphram in the carb goes bad from sitting over winter. It loads up the cylider with fuel and makes it very difficult to pull the rope. ...

Ad

...hard to start after i get it started and start to cut the chainsaw will stop First and foremost. The right mix of oil and gas is essential to any 2 cycle engine running/performing properly. I always ...

Ad

Question about Poulan Garden

1 Answer

...hard (not easily flexible) or if the needle valve is stuck shut the engine will not be able to get the gas that it needs to run. If the Needle valve is stuck, just clean it and it'll most likely be ...

Question about Garden

1 Answer

...gas to get way too hot, making starting very hard. On older Homelite saws, if it isn't kept clean it will acually boil the gas in the fuel tank. Take the starter cover off, and blow it out as good as ...

gas, good compression tried starting fluid. Whats the problem? Quick way to check condition of the engine is to remove the muffler. Also make sure that the spark arrest screen is clean. 

Question about Homelite Garden

1 Answer

...gas cap and make sure that vent hole in cap is open.Otherwise it can draw a vacumn after being ran for awile and be very hard to start.One last thing is make sure that spark plug gap is correct and ...

...hard to see the spark. if you have spark, do a compression test. A pull the muffler and either a struck ring or badly piston and cylinder. Alternatively you can do a compression check as you need at ...

Question about Garden

1 Answer

...gas tank, it looks like a factory drilled hole with nothing in it. is this hole for some kind of check valve? I dont know where the fuel is leaking from but i`ll make a guess and say the fuel lines ...

Question about Black & Decker Garden

1 Answer

...gas will evaporate and cause deposits to form (hard) and clogg up the small ports in there electric models, should be inspected for cuts to cord and general safety ck over saw to make sure it's not ...

gas (with oil of course). Pull the spark plug(s) and check the spark gap referring to your manual. If the gap is too wide, you'll have a hard time starting it. It's also a good idea to check how dirty

Not finding what you are looking for?
Poulan Pro Chain Saw 46cc 20" Logo

513 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...