Poulan Pro Chain Saw 46cc 20" "ignition gap setting" Questions

Ad

...Ignition module gap setting Hi... I have replaced a number of Ignition Modules in chain saws, lawn mowers, etc. and the one trick that solved the problem of setting the Gap Setting, was to use a ...

Ad

Question about Poulan Garden

1 Answer

...ignition module pole gap to the flywheel. Rotate the flywheel magnets under the ignition module poles, and use a thin business card for a gauge. With the card in place, loosen the module screws and ...

Ad

gap. Make sure ignition switch is on. If still nothing, remove the cover from the flywheel. Set the ignition module gap by using a thin business card between the module poles and the flywheel magnets.

gap setting between the ignition module and the flywheel? What is the spark plug gap? Unsure about your first question as I have had no problems with the ignition module or flywheel as of yet. However

Question about Stihl Garden

1 Answer

gap will retard the ignition timing. Unless you've had the engine apart, the valve timing won't need re-setting. The valve clearances will need setting from time time and the clearance between

Question about Poulan Garden

1 Answer

...gap gauge. Turn the flywheel magnets under the ignition module poles, insert the card into the gaps, loosen the module screws and allow the poles to contact the magnets. Reset the screws and try for ...

When replacing the ignition module, what is the proper gap setting between the ignition module plates and the magnets in the rotor? The air gap should be 0.3mm

Question about Poulan Garden

1 Answer

...ignition module. Set the module pole gap by turning the flywheel magnets under the module, insert a thin business card into the pole gaps, loosen the module screws to allow the module to contact the ...

Question about Garden

1 Answer

...ignition point gap should be when the case says 045AV and the literature I find says that this has an electronic ignition (magneto) and the literature says breaker point setting; none. I set them at ...

...ignition module. You need to use a thin business card to set the pole gap at the module--access the flywheel/module area again and turn the flywheel magnets under the module poles. Insert a thin ...

Not finding what you are looking for?
Poulan Pro Chain Saw 46cc 20" Logo

513 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...