Poulan Pro Chain Saw 46cc 20" "chainsaw overheats" Questions

I have a poulan 1625 electric chainsaw that is made I have a poulan electric 1625 chainsaw that is made for 220v european electrical outlets. I want to change the plug/wire/what-ever to get it to work

runs for 4 minutes then overheats and stops Check cooling fins on cylinder head are clean, clean filter, clean exhaust, all these things help disperse heat from the engine. Make sure fuel/oil mixture ...

why 064 stihl chainsaw quit oiling ? Strip and clean the saw wash oil tank with some petrol LET it dry if you have run the saw with no oil or no oil pumping the pump can overheat that can be the end ...

My model 10550 overheats on large wood. I have changed the oil mix but it did't help does it overheat then cut out if so it will be oil mixture also is it a manual pump or not chain needs to ...

it is overheating Generally chainsaws overheat when the chain is not sharp enough or the chain oil is not getting to the chain. To check the chain oil run the saw with the end pointed at a white sheet

chainsaw, or, failing that, I need instructions on what kind of oil to use on it, and whether I need separate oil for the chain. You shouldn't need any other oil than the oil to keep the chain and

my Remington electric chainsaw will not start it just stopped running. is there a fuse or reset button The switch has failed or you broke contact in the plug. Replace the saw and use it only under ...

Stihl MS250 overheats and burns out engine. the carb fuel augments mite be set to lean or gas oil mixture not mixed rite

Seems to overheat and cut out after 1/2 hr-2hrs? Let it sit and cool and fires right up again Chainsaws will do that, as you are asking a small but tough little engine to do a lot of work. Consider ...

Stihl MS250 Chain saw overheats. I have had two MS250 saws overheat and be ruined. I have always been careful with the fuel mixture. I have kept the saws clean. The saws were not old. In fact, I had ...