chainsaw dies out when gas is pressed to full throtle chainsaw runs fine until gas is pressed. When gas is pressed all the way, it dies instead of reving up to full throttle. Carb needs teardown and ...
chainsaw dies at full throttle, idles fine and works with half throttle hi check the fuel filter,clean the gas tank,the carburator ,check the fuel pump(not to be tired).the fine filter inside the carb
...dies at full load or under load, probably means that when your saw gets hot or requires more spark, your coil is not able to provide it. Your carb is easy enough to clean out, you can take it all ...
...full throttle it startes to die. The saw will run fine up to 3/4 throttle but not full throttle. Spark plug if good shape and put freash gas and oil also the air filter is clean. Hi, bring the hi ...
...chainsaw dies out when throttle is depressed, press throttle several times and it will rev up but holding full throttle the engine will bog down. have checked air filter dissasembled carb new gas / ...
...dies when given full throttle. chainsaw idles but bogs out and dies when given fuel First thing, Check the air filter, once checked, & clean/replaced, Adjust timing. This is a very easy job to ...
Saw starts up fine...won't full throttle....dies will not run at full throttle try cleaning air filter and replace spark plug
dies. Cleaned the carb. Out of ideas. This an example of a carburetor comming from a realy bad budged chainsaw orange colored Brand model below number 340 yes a ZAMA carburetor hihihihiii its not done
...chainsaw will run only full throttle and when you let of of the trigger it wont idle it will die Hey on the carburetor there is 2 mixture screws 1 is for idle up to 1/4 throttle the other is for 1/4 ...
...Dies when cutting My ryobi c4620 chainsaw will start fine, but when I apply full throttle it seems to get bogged down a little and doesnt have full power. Then, as soon as I touch it to any wood it ...
513 questions posted
Usually answered in minutes!
583 Questions
255 Questions
170 Questions
