Poulan Pro Chain Saw 46cc 20" "adj idle speed" Questions

Ad

Question about Husqvarna Garden

1 Answer

...2 pulls but wont idle - no matter what i do with the low speed adj.or throttle adj. It revs up on high speed no problem-but cant idle....any ideas? tks... set you carb adjustments at 1 1/4 and try ...

Ad

Question about Garden

1 Answer

idle adj screw Idle adj screw vibrates out and the idle speed is high. Hi Charles Gregory.When you clean your carburetor and remove the jet screws, you will first need to lightly seat the jet ...

Ad

...adj and one is high speed adjust. Turn screws all the way in until they bottom, not too tight--turn them out 1 1/2 turns. Start saw and adjust the idle screw by turning in until it starts to sputter ...

...adj screw a turn and start the motor,,warning if the chain is on make sure the blade isnt likely to touch anything when the engine starts as you will have to have the brake off to get started and ...

Question about Stihl Garden

1 Answer

...idle. I have pulled the carb, cleaned and re-installed. The muffler was loose so I tightened it. I have tried to adjust the low speed adj but to no avail. I have a Husky doing the same thing. The ...

Question about Poulan Garden

1 Answer

...adj. idle The 'H' and 'L' jet needles on late model saws have 'D' heads requiring a matching screwdriver that only servicing dealers have (thank the EPA). The idle speed screw is owner adjustable and ...

...adj for cs 2138c jonsrude chainsaw start with the idle just above turning the chain--set low side up til the chainsaw will rev up without a bog--high speed side with the throttle wide open to smooth ...

Question about Garden

1 Answer

adj "H" to where it 4cycles just a little, in otherwords run it in a little till peak sound(rpms) then back off till just is on the edge of slowing down or garbling a little. then go back to low speed

...idle at the proper speed. Should just be a little bladed screw driver, most are, turn the screw very little, 1/4 turn at a time till something changes, they are sensitive. If you run out of adj and ...

Question about Poulan Garden

1 Answer

...adj. screw closest to air filter, which should be "H" screw it in slowly till you reach max rpm's then reverese   the screw just till it starts to slow down, keep in mind don't take ...

Not finding what you are looking for?
Poulan Pro Chain Saw 46cc 20" Logo

513 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...