...wire feed works but it will not arc when you touch it to the ground and feed the wire. Check ground connection at welder along with your ground clamp. Bad connection could be the issue. Also check ...
Question about Lincoln Welding Tools
...it arcs. without the gun trigger being pulled or any wire feeding. i believe that the trigger only send out the wire and does not control the arc the tip should be live as long as the welder is ...
...arc not stable. Wire feeds, good ground, Weld arc not stable. Wire feeds good ground everything looks good liner pulled and cleaned new tip. Arc blow could be the cause! Put your ground on the work ...
...arc or burn. Wire feeds with no spark or burn on contact of wire. You need to inspect the ground.Where it connects to the machine, and at the end. I bet one of the connections or the wire itself is ...
...wire feed rate and the current applied. You will need to experiment with these settings to find what works best with your welder. For this welder and 3/16 material, I would suggest you start at the ...
...wire feed welder I am getting no arc when pulling on the trigger. The gun is feeding the wire. It's grounded to the vehicle that I am trying to weld on. Any clue on what's the problem? thanks either ...
wire wont feed or arc Use a voltage tester to make certain you have current at the steel roller assembly that the wire feeds through. Check the diameter of the wire also, to assure contact at the feed
...wire feed just clicks even with no wire wont ark only on light and fan working It won't arc without wire in it. If the motor runs then there may not be enough tension on the feeder wheel to push the ...
...welder 2175 wire keeps feeding wont stop doesnot arc until trigger is pulled Look on the front pannel. thier should be a "latching Switch" indicated by "4 X 2" little arrowes. The 4 is " pull the ...
Question about Clarke Power Products Welding Tools
welder Everything comes on and the wire feeds. However it will not arc. I replaced the grounding wire and it still will not arc. I looked for a fuse but did not see one. [email protected] Check that
28 questions posted
Usually answered in minutes!
111 Questions
26 Questions
20 Questions
13 Questions