Hobart Handler 140 Mig Welder "timer" Questions

my welder will on weld for 30 seconds Check the timer on the frot pannel, a diail with "......." or ------ " will be seen beneath the dial, turn the dial anti clockwise to off position.

will start to weld then will stop release trigger you can start again but only a few seconds does it have a spot timer? you don't mention what brand or model

...wire feeder continues to feed wire after trigger is released, approx 3 inches Problably you have timer switch. If you do turn it off. If not, check your gun trigger switch. Dependig on the type of ...

...have a Stich and spot facility, these are indicated by Stitch -------- and spot by .......with a timer control numbered 1-10sec make sure that both are switch to off, anti clockwise, These

would like to if the telwin bimax 182 turbo have stitch timer an where do i find it on the machine?machine is to years old. Hi there, the Bimax 182 has the stitch weld switch between the wire feed ...

...underneath the dial. this is for stitch welding, turn this dial off, (anticlockwise). this is a timer for stitch welding and the dial is a timer. for continues welding this must be off. also some ...