...Lincoln Handy Mig I am running 0.30 wire welding a roll cage on a race car the welder keeps overheating {light keeps coming on} wont weld just sputters keeps kicking the breaker {20 amp} sometimes ...
...lincoln 3200hd wire will not feed, the fan come on i here the relay click but the motor will not turn no power to it. i do not see a fuse any where. any help thanks chris If the power to the unit/fan ...
lincoln hd 140 barely sparks haven't used welder in 6 months or so tried sat and it will barely spark any ideas? Try switching the a,b,c,d back and forth a couple of times a corrosion builds up and ...
Question about Lincoln Welding Tools
Lincoln Pro-mig 175 w/ no wire feed but relay clicks fan runs machine code 11009 *no voltage at wire feed motor *relay clicks when trigger is pulled *fan runs It worked fine when I put it in storage ...
...Lincoln mig welder 3200 hd the other day, and it stopped feed wire for some reason, but it turns on, like the fan and such, what do u think the problem is? kink in the wire. Or the rollers are to ...
wire feed will not work, fan runs and trigger is operable, the line is not clogged Check to see if the drive roller is rotating. Then check the pinch roller is applying sufficient force on the wire.
...lincoln sp-175plus, when trying to weld it the arc just melts the wire and it balls up at the end. I also put a new contact tip in. As well sometimes the wire feed just stops. I then press it again ...
...fan works and the machine clicks when i pull the trigger,but the wheel doesnt spin.I can easilly pull the wire through so I know it not binding up.TIA you are going to need to remove the wires going ...
...fan motor runs, relay clicks in, but motor feed roller does not turn. model 117-050-910 century. thanks Either the trigger mechanism in the gun is bad, the servo that turns the feed wheel is bad, or ...
146 questions posted
Usually answered in minutes!
26 Questions
20 Questions
13 Questions
