...feed at slow speed.Works fine on higher speeds,but not slow.Was fine Saturday.It's a Hobart Handler 120.I'm trying to weld pipe for a fence,and all i get is balls,not beads,was told to slow the speed ...
...feed motor seems to slow down and wire pushes my hand away when hitting metal. If wire pushes your hand away when welding you need to do one of the following: Reduce your wire speed, or increase the ...
Question about Miller Welding Tools
...helps to feed wire thru cable , if successful you have allowed the amps to get too high for the feed rate (slow) and melted the tip closed , these tips are replaceable from miller and are not ...
i have power mig 100welder wire come out slow Make sure that the wore feed wheels are tight and the is nothing in the way if the wire when flowing
Question about Firepower Welding Tools
what could be wrongI got a lincoln welder 180 mig wire feeding way to fast Did you try to slow the wirefeed down.
Question about Lincoln Electric Welding Tools
...feed welder wont slow down. I was welding some thick galvanized pipe and went to turn the wire feed down and it didn't work the speed feed rheostat(control) is shorted or you've got a short on the ...
Question about Hobart Welding Tools
Welder will feed then it slows down then stops wait a few min then it will start up within a few seconds it slows and stops again its a 175 Hobart What is the duty cycle of the welder?
feed.. Turn up your voltage and slow down the wire. then increase your wire according to the speed of travel of weld. That is an awesome machine but it is still up to you to get the settings dialed in
...feed motor working now,but erratic now,fast then slow,trigger ok,trip ok,noisy motor may need new 1 cheers? erratic wire feed speed can be from worn inner liner in the lead the inner lining is like a ...
Hobart handler 135, the wire starts to feed for about 15 seconds then slows and stops. Hi:Don't know how old is your unit but my guess is that your gun's liner is the problem. Have you change ...
146 questions posted
Usually answered in minutes!
26 Questions
20 Questions
13 Questions