Dremel 300-N/55 300 Series Tool Kit "problems tools" Questions

where is the fuse for the dremel 300 series there is no fuse in this tool, you have another problem and I would go to Dremel.com and talk to their tech support and also download a breakdown for this ...

Dremel 395 rotary tool - not working I was cutting a piece of metal with the rDremel 395 otary tool with a cut-off wheel attached. After a while, the tool just stopped. I let it cool down and tried ...

I purchased a Dremel Xpr 400 series rotary tool a few years ago. I have not had any problems with it until now. I replaced the brushes and now the covers over the brushes won't close completely. The ...

My Dremel sijmply stopped working suddenly. Where do I begin? Brushes? If you have a volt/ohms meter It is a process of elimination. First unplug tool and remove the brushes turn the switch on and ...

I borrowed a black and decker rotary tool (RT 550). I can't seem to get the bit off or be able to change bits. There is no tool to use to open the bit and everywhere on-line it says ''quick swap of ...

changing the sanding drum cant get it on the rubber drum have same problem. take retianing screw and washer off, remove from arbor and roll the rubber between fingers with a mashing force. this can ...

Cannot release tool from Dremel 300 I can't get the tool bit out of my Dremel 300. I depress the blue button and try to loosen the chuck with the little wrench tool that came with the Dremel but it ...

Dremel MultiPro Model 395 was used to cut out drywall, now it does not run.Could dust in the motor be the problem? Tried blowing out the dust from the housing. Drywall dust has ruined your tool. It ...

stylus motor make terrible noise Take it back to the store, explain your problem. Like as not, they will exchange it. My experience with this tool tells me that it is a noisy unit. Depending on the ...