Weller D550PK Professional Soldering Gun Kit "iron" Questions

what is the uses of an iron stand ? Hello, the iron stand is used to keep the soldering iron from tripping over that reason why it so heavy. The coil spring is used to hold the soldering iron and ...

...aren't very useful how do i use the gun? A soldering gun is used much the same as a soldering iron for melting solder mainly to connect electronic components to circuit boards. To use it you ...

I am making jewelry with the iron....my tips are dispersing...what is my problem. Should I use a different watt. All that I am doing is soldering over copper foil to broken china. 25 watts is a pretty

INDICATOR LIGHT ILLUMINATED THEREFORE POWER TO IRON BUT FAILS TO HEAT UP. The most likely problem ishte heater inside the pencil. This can be replaced for around $25. Check with a local electronics ...

how to remove a weller sp 80 tip Just loosen the screw in the barrel near the tip, then rotate while pulling the tip out. It shouldn't be necessary to remove the tip unless it requires replacement. ...

I AM AT ZIP CODE 13669 WHERE CAN I BUY 7235W TIPS I think the 7200 and 8200 both use same tips. look at www.matelectronics.com for them. part # 7135 $4.95 pack of 2

Wich tips are made for the Welle sp80? I need a chisel formed tip that's around 2-4 mm wide. Hello, go to this web site and search it: www.e-sonic.com/aboutus/cat/S/soldering%206.pdf ...

LSP-60 i have filled it with butane and no gas is coming out now....it was working just a minute ago. Hello, if does work and leaking fuel. Take it back to Sears for a replace. Do mess with. If does ...

...no idea what else the problem could be Chances are that the screw and maybe the hole in the iron barrel have been 'cross threaded'. Remove the screw and the tip, then examine the screw and ...

how to disassemble weller soldering iron Magnastat Station - 42W Hello, if the head element in the barrel of this soldering iron is shot. Recycle it and save the copper and other materials for ...