...blade fits in the saw. It will lock in the open position. When you insert the new blade, do so firmly until the collar releases locking the new blade in place. Give a tug at the blade to make sure it ...
blade into 310 reciprocating saw the instructions in the manual do not make it clear Point tool away from body. 2. Rotate blade clamp collar (the knurled diamond pattern knob just at the back of where
...How do I get the blade out? lock the blade in a vise or grip it tightly and with the clamp open TAP on the shoe to pull the saw away from the blade. Use gloves and unplug the tool before
...saw. I'm not sure why, I lock the blade into place and start to use the saw and it falls out while operating. Is there a way I can fix it? the lever for the lock has a indentation in it to lock the ...
need to replace blade how do i replace blades Just lift the lock arm on the front. blade should locate on a pin in the plunger lock assy.
...saw instruction manual? Blade won't lock properly. Blade keep popping out. There is a ball lock in it and you have to twist the ball lock but if the ball lock is frozen generally WD40 will help ...
how do I change the blade on my recipocating saw? There is a small lever on the right front side of the tool. Lift that up to release the blade and push it down to lock the blade in place.
my Bosch rs20 reciprocation saw at stuck open and is locked. I am unable to turn the locking mechanism. thanks for help You have to press the blade into place to trigger it to close.
...blade was extended past proper distance and is locked in place. saw works but cannot change blade We had to send our saw to repair center to install new lever. Fortunately, still under
...Saw has two blade "holders" inside it (4 positions) , the yellow lever on side will load and lock the blade in the horizontal position but not in the vertical position? I'm having the same issue. ...
38 questions posted
Usually answered in minutes!
14 Questions
1 Questions