Question about Craftsman Saws
...SAW lent the tool out; blade broken where it goes into holder on saw. cannot find instruction book; cannot remember...if i ever knew...how to get old blade out and install new one. Send verbage and ...
...blade into saw: 1. Loosen set screw. 2. Insert blade shank from the front between the reciprocating shaft and the blade clamp. Locate hole in blade over pin on reciprocating shaft. 3. Tighten set ...
saw/remove battery press the button on the side near the blade pull old blade out. push new blade in, release button to lock new blade in place. I have a Milwaukee and older Porter Cable. The cordless
...up and slide the blade into the slot at the head of the saw. Once you lower the lever, it will lock into place. Make sure you also have the right saw blades as some do not fit right. Hope this
...blade shaft out of the saw to get at it, plug the saw in and hit the on/off trigger a few times to get the shaft and knob out of the body of the saw. Once you can get at the knob it should be easy to ...
...blade on dewalt dw303 reciprocating saw Open the yellow tab on the side of the blade guard and lift the blade out. Install a new on and close the tab. If the blade has been damaged, it may need to be ...
...blade was extended past proper distance and is locked in place. saw works but cannot change blade We had to send our saw to repair center to install new lever. Fortunately, still under
...install a blade. Says to turn it and install, able to turn it, but blade will not go in. Appears to be a pin going through it.?? Hi First, do you have the right style of blade? I have found with mine ...
broken blade in dewalt sawzall Remove broken blade, install new one. These blades don't change themselves, unfortunately.
33 questions posted
Usually answered in minutes!
53 Questions
40 Questions
32 Questions
