Question about Briggs & Stratton Electrical Supplies
...oil quality and level, air filter, switch part number 31 had connector off(do not know what switch is called) which was no help. Looked over fuel valve assy which looks OK. Unit has been used for 2 ...
...Check the generator AC output voltage as soon as the engine starts. Models showing "B1-B2 Volts" or "L1 AC Volts" under CONDITIONS REQUIRED TO KEEP RUNNING need this AC voltage to keep running. Read ...
...and shutdown occurs. Shutdown for AC usually indicates an open winding or damaged voltage regulator. check the hertz if not on 60 it will shut down you can adjust the hertz by adjusting the ...
voltage to sensing, to fuel to control boards. A good place to start (as the unit does run) would be with the fuel system, if it has sat a long time it won't help. Also the fuel filter. try conencting
voltage drop across the far ends of the fuse wiring (should measure zero), as one of the wires or it's connection to either end of the fuse may be open. Check the battery negative grounding connection
121 questions posted
Usually answered in minutes!
166 Questions
