Porter Cable 10,000 Watt 20 Hp Portable Generator #H1000IS W... "adjust governer" Questions

I have a porter cable 5500 watt 10hp gen its now running wide open how/what do i adjust to have it run normal?? high idle screw or governer

governed speed of the generator. For 60Hz it should be about 3600 RPM. 3000 RPM will give you 50Hz. Adjust the RPM up to 3600

where can i get spare parts for a hyundai hy3000si generator [ie] voltage regulator i need a sealed regulator unit 12 volt 240 volt as it only produces 120 volts voltage output readings are governed ...

...governor thrust counter weight has come out of it's locking plates. if governor arm has been adjust wrong way or moved from it's original position this will happen

My generator does not throttle up automatically Although I can manually adjust the throttle and thus produce power, my generator used to do it automatically, what needs mending please? Hi there, I've ...

engine is shutting off when u release the throttle Hi. Sorry for the delays but the new site and I have some major issues as far as navigation and concept. *They are working on it" Could be several ...

...with the carb linkage moving back and forth on it's own. I also do not see where engine speed is adjusted eventhough the Tecumseh manual says it should be. Any suggestions? Thanks, Bill I've never ...

Have Onan 3.6 KY propane gen that will not keep running. Runs only as long as start switch is pushed. Then stops immediately after release. Fault code is 15 (underfrequency) and suggests removing ...

...like dvd satelite reciever, what could be the problem? It sounds like the governer needs to be adjusted because your low on hertz . You should be at appr. 60hz for clean power for your sensitive ...