...max valve. It does not shut off the water, which overflows into the overflow tube. To repleace the fill valve would be quite difficult because of lack of accessibility. Suggestions? Your local home ...
...fill valve in and it was hissing and water was flowing slowly into the bowl. I had put a new korky flap on as well. So I bought a fluidmasted perfor MAX flapper and installed it and it solved the ...
...Max" flush valve system. The Korky/Lavelle folks have a carded replacement flapper #2021BP for it. It is red in color and the only generic flapper that will work on your toilet. While it may look the ...
...are clear the problem is in the fill valve. The G-Max system denotes the Flushiing system which is a 3" flapper that allows the water from the tank to flow into the bowl quicker. Good Toilets! ...
...max valve make a high pitch squeal when the toilet is flushed and also when it is finished filling. So at the start and stop.... Is this a defective valve or is there something I can do to stop this ...
max fill valve does not shut off You might remove the tank lid and check the water level. If their is no water in the tank then the flapper or rubber dish covering the tank outlet is failing and needs
...Max valve: It will not shut off when it reaches the fill line, but constantly runs a continuous stream of water even while water from the tank is overflowing down the overflow tube. float is sticking ...
...fill tank nearly full then pump down and shut off. I would check to make sure that the float switch is not hanging up on something or perhaps rubbing on the tank wall that is stopping the pump from ...
64 questions posted
Usually answered in minutes!
80 Questions
41 Questions
21 Questions
