...keeps flowing back into the macerator we have installed the macerator and it was working fine for a month or so and then its just started running all the time, the water seems to be running back down ...
...keeps running when flushing masorator keeps running unless you kick or shake it sounds like a stick float vave check this link on maintenance of your system. Here is a nice link for your saniflow ...
I have a saniplus toilet, the macerating unit runs about every 2 minutes for 1-2 seconds at a time. I'ver replaced the flapper and even turned off the water to the unit and stopped using it, but it ...
Pump keeps running after full dicharge of waste. Most likely the float swithc could be stuck in the on position. Which pump model do you have?
...keeps on running Fitted new toilet with a Sanyslim in March 2009 and was working OK until a few weeks ago when some of the time that you flush the toilet the Sanislim keeps on running, decided to ...
my macerator pump is staying on Depending on the model, the level pressure switch may be stuck in the on position. Or if it runs on a pressure chamber then the membrane could be warped, if warped then
keeps running and overheated then cut out Gain access to the macerator float(s), and make sure that they operate freely. You may have some packaging or other material preventing it's correct operation
...keeps sticking in the macerator and it will not stop running. What can I do to solve this problem I am sure you have this manual but looking at it I would say replace the float: ...
...keeps running and blowing trip fuse any idea's Mine did this, have you tried using a drain cleaner to break up any blockage? I had to unblock the outlet pipe by connecting a garden hose and flushing ...
...keep the grease from congealing. Even if it does, the solids from the toilet and the rpm of the macerator will keep it pretty darn clean. I did one for a rental apartment 10 years ago and have no ...
12 questions posted
Usually answered in minutes!
250 Questions
168 Questions