loose? If it is faucet body on sink loose under sink there should be screws and a plate or washers holding it sink. Tighten them up. Some have a bolt or nut in the middle requiring a socket to tighten
...plumber installed it but there is a half moon like nut that screws on the main shaft. How do you tighten this? It bangs all the tubing that sticks down from the faucet. handle loose from body of ...
...faucet very loose where it meets the granite My delta 473 faucet is very loose where the faucet meets the granite. I've looked underneath and do not something that looks like it could be tightened ...
loose from base. How to tighten it? Pull out sprayer has a plastic nut to tighten under countertop. You should be able to reach underneath and hold the top while tighting the bottom. It designed to be
loose - I have looked under the sink and there is no brass nut - there is a brass u-shape plate that the water lines go through but no nut to tighten. I believe that I need to access some nut throught
...Faucet is loose on granite counter Can you instruct me on how to tighten the GROHE faucet to my countertop? http://www.needplumbingsupplies.com/Grohe-Kitchen-Sink-Faucets.asp?id=13758 This link has a ...
loose kitchen faucet buy a basin wrench, slip it on the large nut on each side of the faucet under the cabinet and tighten. The wrench head flips from one side to the other for tightening or loosening
loose - I can just get under the bench but not sure what to tighten - nothing seems to work. Any help would be appreciated. The tap is held in place with a large nut. There is a special wrench with an
...faucet. I think there are two types of springs. I usually leave the ball adjustment loose, and tighten the cap. Then I use that little spanner wrench to tighten the ball. Have you used the little ...
handle has come loose, just spins. Most likely the screw in the center of the handle has become loose and just needs to be tightened. Pop off the cover with a screwdriver. and tighten the screw.
72 questions posted
Usually answered in minutes!
