Epson Stylus NX400 InkJet Printer "start button" Questions

Start button. If the printer shows the cartridge is low on ink, press the Setup/Utilities button. Press the or button to select Press Start to change cartridges. Then press the Start button. Press the

...START button. 3. Use the UP or DOWN arrow (copies) buttons to select the desired copy quality you want then press the START button again. Now press the copy button and select the START button. Pls ...

...it ON AND the STOP button. You have to Hold ON and STOP down at the same time until the ON Light starts blinking. When you see it starts blinking release these buttons. I hope that helps!!! ...

...button to power on, still holding 2.) 5.) the LEDs start to flash, then they stop to flash and the red exclamation mark starts to flash. Now release 2.) 6.) the LED should say: "Init EEprom" 7.) now ...

...a CX6400 and I don't know if this helps but it's worth a try: Press the setup button and the screen starts with #1 option. by pressing the top lit green button to the left of the screen, it will go ...

while. tried to print and black and cyan were not working. clean nozzle / head many times and black started to appear on test pattern along with a very little cyan. then my ink button started to flash

...flashing red paper jam button and ink button but no green button cannot get the printer to start again http://www.fixyourownprinter.com/forums/printer/35608 this website will answer all your ...

...button for some 10-20 seconds or until the printer springs into life; Allow printer to complete its processing then turn it off for a few seconds and turn it again on. By following the above any one ...

...start button, suddenly start blinking red alternatively. Never happened before. The black is nearly out. Now what? Who, somewhere in our crazy world, can help? Thanks. Good day! Have you try ...

...down. 2) Press the button marked "Start B&W" for a black and white copy, or press the button marked "Start Color" for a colour copy. If you still have problems, it's very clear on the manual - page ...