Brother MFC 6490CW InkJet Printer "detect sensor marks" Questions

...of the print head driver has risen abnormally. The head driver chip temperature sensor in the COF detect abnormally high temperature. that was the error code means. solution Printer head ...

...aficio 1224c with errors c481 i have some ricoh aficio 1224c with sc481 SC481 Transfer belt mark detection error ? The main motor is operating; and the lock signal is detected. → The

...sensor to detect the mark to make sure that the belt is turning around. The problem could be if the sensor is dirty, the belt is dirty, belt is out of position or damaged(torn), or worst case, the ...

Where to find the site and is meant to sc481 481 D Transfer belt mark detection error ? The main motor is operating; and the lock signal is detected. → The belt mark sensor signal does not ...

...code 481 This copier is showing this number, that is all. Thank you in advance Transfer belt mark detection error ? The main motor is operating; and the lock signal is detected. → The belt ...

...sensor. It should pass through the center of gaps or marks or notches, but not through pre-printed areas if possible.Run Auto-Calibrate in CALIBRATE CTRL menu, which sets Gap and Paper Out ...

...and look at your machine .... below is the description of the error code 481 D Transfer belt mark detection error ? The main motor is operating; and the lock signal is detected. → The

sc481 What does this code mean? Hi, This Code refers to Transfer Belt Mark Detection Error.The Information that i found on the Outer World ( Internet ) is that the Main Motor is Operating and the Lock

...on xpopereting system machine & when print printer show error on printer red light Check the detection and the label size. Use no detection if it's continuous media or transmissive or black ...

...values which are given by your sensor? Have you checked that you have selected the right type of detection before calibrating? Gap or black mark? Have you checked that the sensor is correctly ...