Samsung LN46A630 LCD TV "video turns 2 hours" Questions

...2 , then there is an internal fault. Common faults that can occur are a blown capacitor on power board, a convergence IC has blown, or a fault on Digital board. Check also the video cable or any ...

...2 months of operation,,I've tried setting it back to factory settings and still it's over sized Have you unplugged your tv for 1 hour and restart it mostly problem will be solved or gently tap on the ...

...video and TV program software. There maybe loose connection to the main board or the board is starting to go bad. Check online - it is a known problem with the Samsung. it is possibly a capacitor on ...

...turns on and I hear audio but see no video. You cannot see the menu prompts when menu button is pushed. Nothing. This has happened in the past and usually after 24 to 48 hours the problem magically ...

...2 boards were fine which only leaves the problem to be the lcd display itself. I was told that this part was still under warranty from the manufacturer since the lcd tv is only a few months old to ...

...video out). (2) We know that the Backlight Inverter is working. Even thought the screen appears to be dark, light from the backlight tubes can clearly be observed. Further, even thought the screen is ...

2 yrs! It's been working for about a week now w/no problems. Hope this helps. Is the red LED blinking 4 times, hear relay click and wait, then another cycle? I developed this problem yeaterday. No

...video on my Samsung LNS4692DX/XAA. 2.5 years of lite use of this Sumsung in my Bedroom, My 60" Sony that is 4 years of a lot of use in my Family room has no problems just a great picture. Surfed ...

2 in. bar covering it, which must be lifted at the top of the TV to allow it and the board to be removed. This is done by unscrewing about 6 large screws that hold that frame, which is used to support

2 hours , sometimes n entire day and suddenly video went down and sound kepps on......what to do...? 24V to the inverter micro processor is low or the inverter transformers are heating up and shorting