Question about Sharp LC Televison & Video
input. What you all need to do is get away from a coax cable connection. If you have a cable box, or satellite box, take the coax cable off and use red, white, n yellow rca composite cables to connect
...coax cable, then all you need to change the TV channel to either Channel 3 or Channel 4. You may have accidentally push the CH button on the TV remote. Please post back what you find. It sounds like ...
wall, but there aren't any coax inputs in the back of the tv, only rca inputs and hdmi input. My tv is a toshiba 32hlc56. you can run it through a cable box or vcr that has a coax input and rca output
Question about Sharp Televison & Video
...coax input? replacing an old tv on a cable system and the input is coax. Does this model have that kind of input. Sharp LC-19SB14 This unit contains both the NTSC and ATSC tuners available using a ...
Question about Maxent Televison & Video
coax input Does not have a coax input You can but the connection type is not the problem. If you have Coax cable or antenna type signal you need to put that into a tuner capable of providing the
...coax input was disabled. How can I enable the coax input on this TV? Google the model number with "manual" to try to locate the owner manual which if the set has such a feature (not likely) will tell ...
...or the like that has a coax cable "Cable" input and RCA (yellow, white, and red plugs) output. These should be able to connect your tv to cable. I hope this helps, and good luck! Sincerely, Der ...
Question about Sylvania Televison & Video
...coax cable to the RF/ant input on the VCR and you'll have to change channels by using the VCR channel selector. Let me know if you require further assistance. hookup will be from a cable box or ...
...Coax input port. I've been through the TV's menu many times, but can't get the other ports to work. Do you have any ideas on this? I appreciate any input you can provide. thanks, -Brian Hi, you must ...
...coax input I get a regular picture without problem. When I switch the connection to the HD coax input, I get 'no picture' when I choose the correct input connector (HD). When I replicate this on my ...
312 questions posted
Usually answered in minutes!
121 Questions
69 Questions
40 Questions
36 Questions
45 Questions