...take you do the instructions. http://phubner.eng.ua.edu/Files/Optiplex%20GX620/advfeat0.htm#wp1132466 You can remove the password of bios, removing the batery of the motherboard for 10 -15
...then check your pc manual for the bios jumper setting. usually you just remove it and wait for 10-15 seconds also but yours motherboard config may differ Thanks, please let me know how it
...for the video 1. open your cabinet. 2. remove the battery form the motherboard. 3. wait 15 seconds and then replace the battery again. 4. connect your screen to the pci ex card. now it should work. ...
Question about HP Computers & Internet
...motherboard. Same like the one in CD ROM drive or hard drive for selecting master or slave. If you find it, unplug the power cable, remove the jumper. Wait 10 - 15 seconds, then put it back. Plug the ...
...15 seconds, then move the cap back to its original position. If you motherboard has only two pins for CMOS reset , then you may use use a metallic object like a wire to create a contact between the ...
...problem so do these steps: 1- remove all the cables of your PC. 2- open the PC Case. 3- remove the Battery From yur Motherboard. 4- wait 15 minutes. 5- assemble the battery again and turn on your
Question about HP Computers & Internet
...motherboard is blinking continuously. - The processor is not starting. - If I remove the power cord, the lights mentioned above and same for 15 seconds. Do the fans run? If not the power supply is ...
...remove power cord. Look on the motherboard for a small 3-pin jumper. Pins 1 & 2 will be jumped. Remove the jumper and jump pins 2 & 3. Now hold your power button down for about 15 seconds. ...
...is black hi if you have done the memory removed along with remove your CIMOS bettery from motherboard along with RAM leave for 10 to 15 minits without both memory after that try hope fully it will ...
100 questions posted
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions