...in the fuser roller. Change the fuser unit if you have to hand. The problem is likely caused by a lack of pressure from the pressure roller. Also check the transfer roller for a similar ghost
...fuser roller to measure the temperauture. if the fuser is getting quite hot, suspect the thermistor to be either dirty (remove and clean it with alcohol) or defective. if fuser not getting hot, then ...
...drys out and goes wavy when it runs threw the fuser roller at rear (180 deg), otherwise it will be the fuser rollers themselves causing your problem, which means that you need to replace fuser ...
low heat fuser How do you fix the "low heat fuse" error message? The fuser is not heating up, a lamp could be out, but usually the rollers are worn and it's best to replace the fuser completely.
Question about Samsung CLP Office Equipment & Supplies
...Fuser ***'y MEA ROLLER (RED IN COLOR) IT'S LIKE A THICK RUBBER - which you can clean it with the Spirit need to clean this part RCT-ROLLER HEAT (it seems fine) ELA HOU-FUSER 220V 0r 110V (it seems ...
Question about Samsung CLP Office Equipment & Supplies
...blade is not functioning or the roller speed/ fuser speed is not correct easiest solution clean drum with dry cloth order maintence kit and replace rollers next order new drum unit order new ...
...elephant skin type wrinkle down it, then this would suggest fuser is past it's best and should be replaced. Remove the fuser and check there is nothing wrapped round one of the rollers. If all is ...
...the Fuser is not heating up. Its possible you have a broken heat lamp. The Fuser will have to get replaced, if you want to spend less but more labor, the heat lamp can be ordered. You are screwed ...
Question about Samsung CLP Office Equipment & Supplies
...replace it? please. If you're trying to say you used label (sticker) paper not rated for laser printers in a laser printer and said labels (stickers) are now wrapped around your fuser then I would ...
Question about Samsung CLP Office Equipment & Supplies
The heating unit had a melt down - the red rubber rollers melted. Where can I get service or a replacement part? Denver, CO area. Is it worth fixing? I use precisionroller.com Free shipping and the ...
493 questions posted
Usually answered in minutes!
951 Questions
221 Questions
108 Questions
110 Questions
74 Questions