Question about Samsung CLP Office Equipment & Supplies
...tray 5. make sure you have cleared any debris inside your printer 6. lastly, do you get a code when you get the paper jam... you may want to write it down and give samsumg a call at 1-800-Samsung, so ...
...load only a few into the tray at a time, ensure that they are pushed all the way up to the front, and the "guide rails" (plastic blue things) are pushed up gently against the side and back. This has ...
...tray there are two compression springsapprx 1/2" in dia. Gently prise apart the 2 flap pivot (on the extended arms) to gain access to the springs ,pull out the springs and either replace them with ...
Question about Samsung CLP Office Equipment & Supplies
tray 1 Sounds like you have a mismatch in the paper you are trying to print on and the paper that is loaded in the printer. HP printers look to feed paper from tray 1 anytime the computer settings don
Question about Samsung CLP Office Equipment & Supplies
...load Tray to load Any supported photo or plain paper media 1. Extend the Main tray by pulling it out with the Main tray release or the tray grips. Load the Main tray Chapter 2 (continued) 12 HP ...
Question about Samsung CLP Office Equipment & Supplies
...SIZE IN TRAY [xx] alternates with LOAD TRAY [xx]: [type] [size] Description This is typically caused if two or more sheets stick together in the printer or if the tray is not properly
Question about Samsung CLP Office Equipment & Supplies
...TRAY 1 LOAD PLAIN PAPER, USE PLAIN EXEC INSTEAD? THE PRINTER IS LOADED WITH 8 1/2 X 11 LETTER SIZE PAPER. You have the settinigs on the printer wrong. There are two things you need to do: 1. Open the ...
...load tray 1. Laserjet 4700. Everytime anyone prints it tells us to load paper in Tray 1, we want to print to the default tray 2 like usual. Is there something that I need to adjust in the printer ...
...tray 1. It was working fine yesterday when I installed it and now one of my staff members have messed it up so please help. thanks Two possible solutions; 1) Check the settings in the printer driver ...
...tray. The load bang is alarming, but not the problem. Check the adjustments in the paper tray. The left and right guides should be snug, but the rear guide should give between a 1/16 inch and a 1/8 ...
493 questions posted
Usually answered in minutes!
951 Questions
221 Questions
108 Questions
110 Questions
74 Questions