...charger hole. Just pry the plastic, not the connector case. Then with a very thin precision blade screwdriver, work your way around both sides of the case. Note: there is a connector that goes to the ...
...and a new charger socket must be soldered into the internal board. This is a precision job and must be done by a technician. I suggest going to a phone repair shop and asking a quote for the
...charger, then replace the AC socket on the phone, as already suggested by the other expert. This job must be done by somebody that knows very well how to do precision soldering, therefore is not a ...
...precision screw driver or if any * detach the front housing or cover * unscrew 4 screw on all corner of lcd frame * Lift up the entire module ( board & LCD ) start from the top * Now you see the ...
...precision screw driver, unscrew the 6 sides 3. gently lift up the entire module from the back cover or housing. (start from the top to lift it up.) 4. now locate the charging pin at the bottom were ...
Charger port/screws I have corriosn damage on the charge port of my phone. it is only on the inside part because the outer part of the port that you can see is clean. Plus when I sent it back to the ...
...charger in.some user get used of turning on their mobile to see if it's working and if not satisfied,they charge it right away.this will be a wrong step and cause the mobile into destruction. If ...
70 questions posted
Usually answered in minutes!
1,356 Questions
1,222 Questions
705 Questions
670 Questions
592 Questions