Moen 3175 Legend One Handle Shower Faucet With trol Pressure Balancing Valve.... "single wont" Questions

...single lever moen faucet and the cartridge wont come out. I have removed the retaining clip and all screws you may need to get the moen cartridge puller,either moen brand, or brass craft, they can be ...

single handle faucet but water not flowing. could it be the diverter or what? did you try flushing the line before you put the cartridge in? sometimes debris gets stuck in the main lines and wont flow

...wont turn off. water has a steady stream coming out. single handle moen fixture The plumber soldered in the faucet without removing the cartridge, the o-rings are melted. Have the builder replace the ...

Blanco oven door wont close properly. Grandchild sat on door while open. the hinges are bent and the catch out of aliament ,remove hinges,straighten where bent and catch should work

...single handle new installation connect fixture and assemble all the parts water wont shut off model TL182 Did you have to install a cartridge? If you did it has to be in the open position. ...

replaced back yard facucet now water wont turn on make sure you have water coming to the tap, if so then you need to take the tap apart theres an inside seat there that you can adjust for more or less

the hot water wont turn off. the hanlde of the hot water is loose, but we cant find a hexkey or allen wrench that will fit in it to take it off or try and tighten it. the little H symbole should be a ...

...single handle pull-out. The base of the faucet does not swivel side to side. I have had it about 5 yrs. How can this be fixed? Is it a broken part to replace, or do I need to buy complete new faucet? ...

...single sprayer faucet ,peerless style, the pin wont go in? a small pin connects the sprayer hose and without the pin in, the water sprays all over, I attached pictures,need to get up and running with ...

Kohler 10433 wont pivot side to side; some kind of washer needed? It just needs to be lubed, but when you take apart to do that you my as well put in new O-rings, and get some plumbers lube for the ...