need bolts to stabilize washer for move The bolts that came with the washer were not re-useable and i need to purchase new bolts to stabilize the washer while being moved to another state. Dont know ...
Question about Washing Machines
I have top load kenmore elite washer high capacity. I understand that locking bolts do not exist for this model. Previously, we had installed a card board like balloon in the drum to stabilize it. Is ...
...I noticed that it had only 2 of the drum stabilization bolts in the back and that none of the front stabilizers mentioned in the directions were in place. Now I'm worried that moving it without those ...
I have an Maytag Epic Z frontload washer. The spin cycle won't work and the error code that comes up is rL. We tried to run the clean washer cycle with no clothes in it and it still won't work. have ...
...found it to be the counterweight ( or stabilizer) whiich looks like a lump of cement, had come loose and was slapping around. Managed to tighten bolts holding it to the drum whiich solved the
Question about Asko Washing Machines
...stabilizer clip/bolts for ASKO washer model W6461 I have an ASKO washer model W6461 and I need to buy 2 new stabilizer clip/bolts that have the rubber around. The washer works but spins all over ...
Question about Frigidaire Washing Machines
...stabilizer (locking bolt?) to hold the tub in place? just transport it upright , it will be fine, keep it tucked in so it doesnt bounce around. Hello, yes you should reinstall the shipping bolts ...
I had order a new washing machine from LG. It's WD11020D, a front loader. However, when taking all the 4 bolts out from the washer. I notice 2 of them were bended. I am worried that it will be ...
Question about Samsung Washing Machines
...What does error code F20 indicate? We recently moved but did use the stabilizer bolts on drum. Gaynell The pressure hose has probably fallen off during the move and will need yo be re
Question about Washing Machines
Do l have to remove this on the back of Hoover washing machine you need to remove the bolts to help stabilize the washer when it is leveled. The plugs will come out with a pair of pliers.
62 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
404 Questions
243 Questions
245 Questions